Search Laptop Screens >>

Saturday, 26 November 2011

Packard Bell NEW90, NEW95, MS2273, MS2285, PAWF7, PEW91, P5WS0 Screen Replacement

These days its very difficult to go a day without using our laptops and mobile handheld. The Packard Bell Easynote laptops are one of the widely used notebooks out there in the market and they have proved to be value for your money. In this tutorial I will show you what to do if you accidentally drop your Packard Bell laptop and crack the screen.

In this instruction we are using Packard Bell models NEW90, NEW95, MS2273, MS2285, PAWF7, PEW91, P5WS0, MS2274, TSX66 as references to the repair. The mentioned models come with 15.6 inch LED TFT screens and can easily damage if not well looked after.

Packard Bell Broken Screen

Remove Packard Bell Battery

One of the most important thing to do when replacing or repairing a laptop or netbook is to first remove the battery. This is important as failure to do this may result to total damage.

Remove Screw Cover

Remove the screw cover as in the image on the right. By doing this you will be able to see the screws holding the screen area and the plastic bit all around it.

Remove Screen Screws

Remove the screws and keep them safely.

Remove Plastic Bezel

Carefully remove the plastic bezel. This must be done carefully. The trick is to put your fingers between the screen and the bezel and pull on all sides until it comes off.

Remove top side screws

Removing the bezel will expose the internal part. On two sides at the top you will fine screws. Remove them and pull the screen towards yourself.

Remove Side Screws

Remove all side screws. This is the mechanism holding the screen.

Remove Camera Cable

If your Packard Bell laptop comes with a camera this will be the best time to disconnect it. Carefully locate it at the top and unplug the cable.

Back of Packard Bell LED Screen

Place the screen face-down on the keyboard area and this time you will clearly see the screen data cable and part number.

Disconnect B156XW02 Cable

Pull the data cable connected to the screen. BUT FIRST PEEL UP THE CLEAR TAPE.

Packard Bell Laptop Screen Removal

The LCD removal process is complete. To install a new screen simply carry on in reverse.


Great instructions, very useful. Thanks!

Post a Comment

Write your comments and questions about Laptop Screen Replacement.