Search Laptop Screens >>

Thursday, 11 August 2011

Packard Bell Easynote TM80, TM81, TM82, TM83, TM85, TM86, TM87, TM89, TM93, TM94, TM97, TM98, TM99, TM01 Screen Replacement


THIS IS HOW TO REPLACE THE SCREEN ON THE ABOVE SERIES

In this tutorial I will list all the available screens for the Packard Bell Easynote TM86, TM89, TM94, TM97, TM98, TM99, TM01, TM80, TM81, TM82, TM83, TM85, laptop notebooks and show you how to disassemble and replace the screens in them if they are defective, cracked, flickering, black or dark or showing lines.

CLICK THE BELOW LINKS TO ORDER THE RIGHT SCREEN

Packard Bell Easynote TM80 Screen
Packard Bell Easynote TM81 Screen
Packard Bell Easynote TM82 Screen
Packard Bell Easynote TM83 Screen
Packard Bell Easynote TM85 Screen
Packard Bell Easynote TM86 Screen
Packard Bell Easynote TM87 Screen
Packard Bell Easynote TM89 Screen
Packard Bell Easynote TM93 Screen
Packard Bell Easynote TM94 Screen
Packard Bell Easynote TM97 Screen
Packard Bell Easynote TM98 Screen
Packard Bell Easynote TM99 Screen
Packard Bell Easynote TM01 Screen

Packard Bell Easynote Laptop

Remove Packard Bell Battery















Remove the screwcovers covering all the screws. Keep these covers safely.










Use a precision screwdriver to remove all screw in the laptop screen bezel.












Put fingers between the plastic bezel and the Packard Bell laptop screen and pull the bezel on all sides to release it from the catches. Do this carefully to avoid snapping the screen bezel.










At the hinges area pull the put your fingers in the little space between the screen and the plastic bezel and this time pull upwards to remove the bezel totally. Use firm grip but do not pull too hard.












At the top two sides of the internal part unscrew the screws holding the side arms to the screen cover.











At the very top part of Packard Bell laptop screen disconnect the cable to the camera and remember to reconnect when fitting a new screen.












Remove all side screws and keep them safely. The trick is to move the screen slight towards you before unscrewing.












Place the LCD screen face-down and now you can see the whole back of the screen. You will also see the LED connection and cable. This area must be handled with care as damaging the cable will require you to replace it with a new one.









At the LED connection area peel up the clear tape holding down the screen cable connection as shown in the image.












After peeling the clear tape diconnect the cable carefully. Be careful not to pull too hard.









Congratulations! The Packard Bell laptop screen removal process is complete. Go through the process in reverse order to fit a new screen.









The Packard Bell series mentioned here come with 15.6 LED in all and the screen part numbers can be one of the below;

  • Samsung Makes LTN156AT16, LTN156AT09, LTN156AT05, LTN156AT02
  • LG Philips Makes LP156WH4-TL C1, LP156WH2, TL A1, A2, A3, Q1, QB
  • ChiMei N156B6-L0B, LOB, L02, L03, L06
  • AU Optironics (AUO) B156XW02 V.0, V.1, V.2, V.3 and other versions
  • Innolux make BT156GW01 V.4, V.3, V.2, V.1, V.0
THE ABOVE SCREENS ARE COMPATIBLE AND INTERCHANGEABLE.




Below I am outlining solutions to the laptop screen defects you may have on your Packard Bell notebook;

Packard Bell Laptop screen Flickering

If your laptop screen is flickering it can be caused by two things. The display cable connected to the screen may be defective. Usually the display cable could develop a problem at the hinges area because of the regular use and the opening/closing of the laptop during use. This is why some people experience the flicker when the lid is moved. Replacing the cable will solve this problem.

The flickering of a laptop screen can also be as a result of the screen itself being defective. It is easier and advisable to change the laptop screen first and if this does not solve the flickering problem then go to the next step of replacing the display cable to the panel.

Packard Bell Screen Showing lines and colours

If the Packard Bell laptop screen is showing lining and colour in the whole or some part of the LCD then it could also be the cable or screen problem. The screen is more likely to to be defective to cause the defects. Use the instruction guide here to acquire a brand new screen and replace the broken one.

Packard Bell has lost its backlight and has gone black/dark

Some people have the problem of the screen simply black or blank and nothing shows eventhough the laptop is running. The first thing to do to solve this is hook the notebook up to an external monitor and if the windows is visible on the monitor then the screen would need replacing. If the windows does not appear then something else may be wrong with your laptop and my advise is to get a laptop technician look at it.

Leave comments and question in the box below.


0 comments:

Post a Comment

Write your comments and questions about Laptop Screen Replacement.