Search Laptop Screens >>

Sunday, 1 May 2011

Acer Aspire One D255, D255E, D260-A, D257, PAV70 Netbook Screen Replacement - B101AW06 V.1 V.0

In this tutorial I will show you how to replace a broken damaged screen on a netbook. This instruction can be used on many other netbook laptops and can be used for models like Acer Aspire One D250, D255, D255e, D257, D260, D260-A, Acer Aspire One Happy, PAV70, PAV60 and others. The Acer Aspire One D255 screen is a slimline 10.1 inch LED LCD screen with resolution of 1024 x 600 and an aspect ratio of 16:9 with part numbers B101AW06 V.1 or V.0. The D255 and D260 also comes with Chi Mei make screen part number N101L6-L0D.


Listed below are links to most of the Acer Aspire D255 laptop screens. You can find these extra numbers at the bottom of your D255 netbook. Note that all these laptops come with the same type of screens.

Acer Aspire One D255 Laptop Screen
Acer Aspire One D255e Replacement Screen
Acer Aspire One D260-A Replacement Screen
Acer Aspire One PAV70 Replacement Screen
Acer Aspire One D255-2DQkk Replacement

Find others at Acer Aspire One D255 netbook screens series.

Acer Aspire One Broken Screen

Acer Aspire One Screen Model

Before starting the screen replacement process make sure that you have a brand new screen in place. For laptop screens check

Acer Aspire One Broken Screen

The Acer Aspire One laptop is a very thin fragile laptop and can be damaged in the slightest impact. This replacement instruction should be studied first before carrying out the work on the laptop.

Remove Screw Cover

First is to remove the screw cover to expose the screw. The covers are usually made of plastic or rubber and by using a screw driver it will easily come off.

Remove Laptop Screw

Remove the two screws at the lower parts and keep them safely.

Remove Screen Bezel

By carefully placing your fingers between the screen and the plastic cover and pulling on all sides you will be able to free the plastic bezel from the laptop. This must be done with care as by pulling too hard may result in breaking and snapping the bezel.

The trick to removing the bezel successfully is to carefully pull upwards to release it from the hinges area. This can also be done with the aid of a flat screwdriver.

Remove screen internal screws

As the internal part of the screen section is now open what is now left is to carefully dismantle the screen. First is to remove the screws from the top area and ones holding the screws on the sides.

Carefully place the screen face-down on the keyboard. At this point it is important not to pull the screen as to avoid damaging the data cable connector at the back of the laptop screen.

By using a flat cable, push up the adhesive tape holding down the screen data cable connection and pull the cable carefully to free it from the screen. Also at this point you will find the screen part number B101AW06 V.0 among some of the writings on the label.

As in the picture on the left pull the cable backwards to disengage the screen data cable from the screen. This is a very tricky thing to do and must be done very carefully as this may result in the total damage of the cable if not well done. The trick is to pull backwards.

The screen removal process is complete. The next thing is to fit a brand new screen to the laptop. To do this you should carry out the process in this tutorial in reverse order. To search laptop screens go to Laptop Screen Online. To order by Part number go to B101AW06 V.1, B101AW06 V.0, N101L6-L0D.

B101AW06 V.1 Screen Removal Process completed


is it possible for someone who doesn't know anything about laptops replacement to to learn it and then be able to replace it?

Yes it is. Simply follow the instructions carefully.

Thanks a lot! this was invaluble information after my wife had sat on her laptop and cracked the screen

woooooooo you saved my life when my friends screen cracked and his wife tried to blame it on one of my kids when they were not even there!!!!!

I am glad the instruction is of help to you.

i believe this is a good guide and i would have to say thanks to the person that made it

I have an aspire one AOD250 netbook and trying to remove bezel. I can only find 2 screws at the top. The area where screws would be on the lower corner of bezel are just blanks (no actual screw hole). It is on tight down there that I think I might break it if pull too hard. Does anyone know how to remove the lower part of bezel??

If there are no other visible screws then it is safe to do so. The Acer Aspire D250 Laptop is very similar to the D255. Good luck.

Oh my god, I can't believe acer put screw holes on the bottom corners of bezel! The were actually hard plastic covers over those screw holes! I had to basically destroy those screw covers to remove them. Finally the bezel is off!

thanks your site and ur fotos its very good i find ur site becouse i want change my monitor and i change this after 15 mim thanks u very much again

Is there a possibility to upgrade an acer one D255-N55DQkk display to a wxvga resolution as now acer produced also 10.1" with wxvga (acer one 522)?

I really doubt this can be achieved. The Acer Aspire One D255 and series come with one type of screen and that is the type you will need to replace it with.

I have successfully upgraded D255E to 1280 x 720. Big improvement.

Is it possible to upgrade or replace an Acer Aspire One D255E(13DQcc) screen from standard-resolution 1024x600 screen to a screen with a resolution of 1280x720? If yes, which screen i should take?

what do I do if I damage the cable connection?

If you damaged the display cable I suggest finding a technician to fit a new one as this can be tricky to do.

I replaced my Acer Aspire D260-2DQKK with a new screen and after 20 mins it went dull & flickers now and the then, I use the Fn buttons but they don't do much and then I hear a high pitch sound coming from the light & dark buttons, why is this.
Thanks for any help.

Great instructions worked like a charm

Thanks for these instructions!
The only thing different with my D255 is that there is a connecter on the top of the screen that you have to carefully disconnect before you can lay the screen down on the keyboard. You then have to untape the cable from the back of the old screen.
You also have to be careful when reconnecting it with the new screen that you tape the cable back in the same spot so that it is easy to reconnect.
Thanks again!

Great post!!! it took me 15 mins to install. Thanks Bra

can u help me choose the correct replacement screen for my acer aspire one, model: zh9. Screen model B101AW06. Cant find my model number on your web site. thanks

Please search B101AW06 on Google or laptop screen online. You can also search Acer Aspire ZH9 easily.

how do i find out the model of the LCD which will suite my Aspire one HAPPY netbook?

All the Happy and the D255, D256 Acer Aspire One come with the same screens. The screen part number can be found at back of the screen. It is usually B101AW06, LP101WSB or LTN101NT08.

wah very thank you because my screnn is cracked and i do not know what to do

Post a Comment

Write your comments and questions about Laptop Screen Replacement.